A versatile, ultra-durable water-borne acrylic, Break-Through!, is formulated to bond to some of the most difficult substrates includ- ing fiberglass, ceramic tile, laminate, and many plastics. The interior/exterior gloss finish offers very fast dry and outstanding early block resistance for increased productivity with less down time. Break-Through! provides hardness similar to or better than standard alkyds but maintains flexibility to endure extreme bends and deformation without cracking and peeling. Break-Through! is ideal for doors, windows, cabinets, shelving, hand rails, fixtures, trim and concrete floors.
See Details


VOC compliant - lower than Federal AIM, OTC, LADCO and CARB 2000 SCM regulations


Stir thoroughly before using and occasionally when in use. Prime all necessary surfaces with an appropriate PPG primer prior to application of the product. When using more than one container of the same color, intermix to ensure color uniformity. Do not mix with solvent-type paints or with paint solvents. USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read all label and Material Safety Data Sheet (MSDS) information prior to use. MSDS are available through our website or by calling 1-800-441-9695.

Application Equipment: Apply with a high quality synthetic
brush, roller, paint pad, or by spray equipment. Where necessary, apply a second coat.

Airless Spray: Pressure 2000 psi, tip 0.009” - 0.013”. Best results are achieved using a fine finish tip. Spray equipment must be handled with due care and in accordance with manufacturer’s recommendation. High- pressure injection of coatings into the skin by airless equipment may cause serious injury.
Brush: High quality polyester/nylon brush
Roller: 3/16” - 3/8” nap roller cover.
Thinning: No thinning required for airless or air-assisted airless application. Reduce 5-10% with clean water for conven- tional spray, HVLP and brush applications.

DISPOSAL: Contact your local environmental regulatory agency for guidance on disposal of unused product. Do not pour down a drain or storm sewer.



Outstanding early block resistance

Excellent adhesion

Very good hardness

Very quick dry

Excellent flow & leveling


Resistant to household chemicals


Provides tack free film ideal for doors, windows, cabinets, shelving

Bonds to a wide variety of difficult substrates

Durability and hardness similar or better than conventional alkyds

Dry to touch in 15-20 minutes; results in less down time

Provides enamel smooth finish with less brush marks

Withstands bends with no cracking or peeling

Ideal for use in areas requiring frequent cleaning with mild household cleaners or light duty

industrial cleaners

Product Data Sheet

Product Support

Send us a message below with your inquiry. Please provide the product manufacturer, description and the issue you are experiencing.