PITT-TECH® PLUS | 90-1110 SERIES
One-component, int./ext. satin DTM industrial enamel
See Details
PRINCIPAL CHARACTERISTICS
- 100% waterborne acrylic enamel
- Excellent adhesion for true DTM performance
- Easy to apply
- Low odor during application
- Soap and water clean up
- Improved color and gloss retention versus most alkyds and water based systems
- Flash rust resistant
- Washable, scrub resistant
COLOR AND GLOSS LEVEL
- Custom colors, white
- Satin (15 to 20 w/ 60° meter)
Note: Certain colors, especially red, orange, and yellow may require additional coats for adequate hiding, especially if applied over primers with a significant color contrast
BASIC DATA AT 68°F (20°C)
Data for product
Number of components | One |
Volume solids | 42 ± 3% |
VOC (Supplied) | max. 0.7 lb/US gal (approx. 84 g/l) |
Temperature resistance (Continuous) | To 200°F (93°C) |
Temperature resistance (Intermittent) | To 250°F (121°C) |
Recommended dry film thickness | 2.0 - 4.0 mils (50 - 100 μm) depending on system |
Theoretical spreading rate | 337 ft2/US gal for 2.0 mils (8.4 m2/l for 50 μm) |
Shelf life | At least 36 months when stored cool and dry |
Notes:
- See ADDITIONAL DATA – Overcoating intervals
- See ADDITIONAL DATA – Curing time
- Two coats are required for maximum protection and for applications where this product is used as a finish coat - Discoloration will occur at high temperatures
Product Data Sheet
Product Support
Send us a message below with your inquiry. Please provide the product manufacturer, description and the issue you are experiencing.
GetInTouchNow