DURETHANETM DTM | 95-3300 SERIES
Two-component, DTM urethane mastic
See Details
PRINCIPAL CHARACTERISTICS
- Direct-to-metal application, including tightly adhering rust
- Low VOC
- Excellent color and gloss retention
- Easy to apply by spray, roller and brush
- Infinite color capability
- Meets SSPC Paint 36 Level 3
- Contains no organic HAPs
COLOR AND GLOSS LEVEL
- Standard Color Offering, Safety Colors, Custom Colors
- Gloss
BASIC DATA AT 68°F (20°C)
| Number of components | Two |
| Volume solids | 65 ± 2% |
| VOC (Supplied) | max. 2.0 lb/US gal (approx. 241 g/l) |
| Recommended dry film thickness | 3.0 - 5.0 mils (75 - 125 μm) depending on system |
| Theoretical spreading rate | 348 ft2/US gal for 3.0 mils (8.7 m2/l for 75 μm) |
| Shelf life | Base: at least 36 months when stored cool and dry Hardener: at least 36 months when stored cool and dry |
Notes:
- See ADDITIONAL DATA – Overcoating intervals
- See ADDITIONAL DATA – Curing time
- Certain colors may be offered for specifications which require 4.0 – 6.0 mils (100 – 150 μm) dry film tickness. Please contact your PPG
representative for details
RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES
- Coating performance is proportional to the degree of surface preparation. Refer to the application instructions for specifc primers and intermediate coats for application and curing procedures. Ensure epoxies are free from amine blush prior to overcoating. All previous coats must dry and free of contaminants. Adhere to all minimum and maximum topcoat times for specific primers and intermediate coats. Aged epoxy coatings require abrading prior to applying the product. A test patch over unknown coatings is recommended.
Product Data Sheet
Product Support
Send us a message below with your inquiry. Please provide the product manufacturer, description and the issue you are experiencing.
GetInTouchNow